Step1: Create Bootable USB Drive
Start PowerISO (v6.5 or newer version, download here).
一分快三平台计划insert the usb drive you intend to boot from.
Choose the menu "Tools > Create Bootable USB
Drive". The "Create Bootable USB Drive" dialog will
popup. If you are using Windows Vista or above operating system, you
need confirm the UAC dialog to continue.
一分快三平台计划in "create bootable usb drive" dialog, click
"..." button to open the iso file of windows operating system.
一分快三平台计划select the correct usb drive from the "destination usb
drive" list if multiple usb drives are connected to the computer.
choose the proper writing method. "usb-hdd" is
Click "Start" button to start creating bootable USB drive.
PowerISO will alert you that all data on USB drive will be
destroyed. Click "OK" to continue.
The program will start writing USB drive, and showing the progress
information. You should get the message "Writing USB drive completed
successfully." after the operation completes.
If no errors occurred in the above process, you should now be
all set to setup Windows from USB drive!
Step 2: Configuring the BIOS
you should now reboot and go into the bios configuration to
boot from usb. instructions for doing so vary wildly from system to system, but
generally entail the following:
一分快三平台计划reboot the system.
while booting (before windows starts loading), get into the
bios configuration screen by hitting something like f1, f2, delete or
escape. hotkey instructions are generally provided on the screen.
go to the section that contains your boot devices.
with your usb drive plugged in, the usb drive should be
listed. if it isnyang, your system might not support booting from usb.
assuming that it is supported (as is the case with virtually all modern
hardware), promote your usb drive to the primary boot device.
一分快三平台计划exit from the bios configuration, saving all changes.
please notice that you can seriously screw up your system by
providing incorrect bios settings!
Step 3: Booting and setup windows from USB drive
assuming that you properly configured your bios and your usb
drive supports booting, windows setup should now load. depending on the
speed of your usb drive, this may take a while.
if it isnyang working, then double-check the following before
making a scene:
Is your BIOS properly configured for booting from the USB
device? (Is the USB device listed and does it have top priority?)
Have you correctly prepared the USB drive in step one?
(Restart the procedure.)
Does your USB drive properly support being booted from? (Try
Note: The above guide works with Windows 10, Windows 7, Windows
8 / 8.1, or Windows Vista.
For Windows XP with SP2 or SP3 please refer to another guide at http://mindsurfmn.com/tutorials/how-to-make-winxp-bootable-usb-drive.htm